Mechanical Behaviour of Dental Luting Cements: Static, Dynamic, and Finite Element Studies.

Abstract

<b>Background/Objectives:</b> The long-term clinical success of dental luting cements largely depends on their mechanical performance. This study systematically compared six commonly used definitive dental cements by assessing key mechanical characteristics such as compressive strength and fatigue resistance. <b>Methods:</b> The tested materials included Adhesor Zinc Phosphate (AphC), Harvard Zinc Phosphate (HphC), polycarboxylate cement (CaC), glass ionomer cement (GIC), resin-modified glass ionomer cement (RMGIC), and resin cement (ReC). Both static and dynamic compressive load tests were performed using an Instron ElectroPuls E3000 dynamic testing instrument. During static testing, 77 samples were subjected to an increasing load up to 1500 N. Dynamic tests on 78 samples involved cyclic loading over seven phases from 50 N to 1600 N, with 1500 cycles per phase at 10 Hz. <b>Results:</b> Static load results indicated that GIC, CaC, and phosphate cements exhibited similar performance and were significantly weaker compared to RMGIC and ReC. In the dynamic fatigue tests, most ReC and RMGIC samples maintained integrity throughout the entire protocol, demonstrating markedly superior mechanical reliability. Finite element analysis (FEA) further confirmed the experimental observations, revealing more homogenous stress distribution and lower peak stresses in ReC and RMGIC compared with the conventional cements. <b>Conclusions:</b> Overall, the resin-based and resin-modified glass ionomer cements showed the highest compressive strength and fatigue resistance, indicating superior long-term mechanical stability compared to the conventional cements. These findings support the clinical use of resin-based cements as reliable luting agents for definitive fixation in high-load prosthodontic applications.